Stone crusher, also known as crusher, pulverizer, is the main equipment for mining, crushing into small particles through the extrusion and bending action and other ways of crushing machinery, in the infrastructure, iron / highway, hydroelectric power plants, and other major industrial areas are widely used, according to the output size, divided into large, medium and small stone crusher, here for you to expand the introduction of large stone crusher models and production capacity, price and other content.

First, large stone crusher models and production capacity

Currently there are about a dozen types of stone crushing machinery and equipment on the market, of which the production capacity is relatively large there are three kinds, respectively, jaw crusher, cone crusher, HGT gyratory crusher, the models add up to about 50 or 60, the output, motor power, feeding, discharging and other parameters are slightly different, the specific specifications of the large stone crusher models in the following table.

Jaw stone crusher model specifications:

Model No. Feed opening size (mm) Maximum feed size (mm) Discharge opening adjustment range (mm) Capacity

(t/h) Speed (r/min) Power (kw) Overall Dimension (mm)

Overall Dimension (mm)

C6X80 520×800 420 60-150 80-290 350 75 2650×1540×1780

C6X100 760×1000 630 70-175 130-420 260 110 3700×2440×2520

C6X110 850×1100 720 80-200 160-550 230 160 3800×2450×2550

C6X125 950×1250 800 100-250 230-760 220 160 4100×2750×2780

C6X145 1100×1450 920 125-275 320-950 220 200 4400×3060×3210

C6X160 1200×1600 1020 150-300 410-1150 220 250 5700×3650×3550

C6X200 1500×2000 1200 175-300 610-1510 200 400 6500×3990×4260

Note: Any change of technical data shall not be advised additionally.

Model specification of cone stone crusher:

Model Cavity Size Feed opening size

(mm) Minimum discharge opening

(mm) Capacity

(t/h) Maximum installed power

Maximum installed power (kW)

HPT100 C1 (ultra coarse) 140 19 75-140 90

C2 (coarse) 100 13 60-110

M (medium) 70 9 52-100

F1(Fine) 50 9 50-95

F2 (ultrafine) 20 6 45-90

hpt200 c2(coarse) 185 19 145-250 160

m (medium) 125 16 135-235

F1 (fine) 95 13 115-220

F2 (ultrafine) 75 10 90-190

HPT300 C1 (extra coarse) 230 25 220-440 250

C2 (coarse) 210 190-380

M (medium) 150 16 175-320

F1 (fine) 105 13 145-280

F2 (ultrafine) 80 10 110-240

HPT400 C1 (extra coarse) 295 30 300-630 315

C2 (coarse) 251 255 285-560

M (medium) 196 20 250-490

F1 (fine) 110 13 180-345

F2 (ultrafine) 90 10 135-320

HPT500 C1 (ultra coarse) 330 38 425-790 400

C2 (coarse) 290 30 370-700

M (medium) 210 22 330-605

F1 (fine) 135 16 270-535

F2 (ultrafine) e 95 13 220-430

HPT800 C1 (ultra coarse) 350 38 570-1200 630

C2 (coarse) 299 32 520-1050

M (medium) 265 25 475-950

F1(Fine) 220 16 370-800

F2(Super fine) 150 13 310-600

Note: Any change of technical data shall not be advised additionally.

HGT gyratory crusher model specification:

Model Feed opening (mm) Maximum feed (mm) Discharge opening (mm) Output (tons/hour) Power (kw) Overall dimensions (mm)

HGT4265 1065 900 140-175 2015-2875 400 3940×4170×6900

hgt5065 1270 1050 150-175 2400-2940 400 4460×4430×7610

hgt5475 1370 1150 150-200 2890-3490 450 4930×4925×8410

hgt6275 1575 1350 150-200 2895-4335 450 5580×5250×9090

hgt6089 1525 1300 165-230 4200-5810 630 5590×5445×10470

hgt60110 1525 1300 175-250 5540-8895 1250 6200×5940×11390

Second, large stone crushing machinery and equipment prices and pictures

For large stone crushing machinery and equipment prices, from the market market, usually in the hundreds of thousands to millions of dollars or so, there is no uniform value, due to different types of equipment, models, parameters are slightly different, mainly to see how to choose, coupled with manufacturing and sales of more companies, so the market offer only for reference.

1 Jaw Crusher

Production capacity: 1-1280t/h

Suitable for compressive strength of 147-350 MPa material, using the principle of extrusion crushing, comprehensive development and mining technology, its crushing cavity is deep, there will be no dead zone, the raw material size is not worried about plugging, in addition, the optimization of the movement parameters, so that the material in the upper part of the crushing chamber can begin to crushing, the lower part of the stroke is large, the crushing ratio is greater, and at the same time, using the wedge block to adjust the discharge port, the finished product can be adjusted, the particle size is uniform, the motor seat and the host integrated structure, the motor seat and the host can be adjusted, the particle size is uniform. The integrated structure of motor base and main machine makes the installation easy and saves space, and there are PE, HD German version, CJ series.

2Cone Crusher

Production capacity: 36-2181t/h

Suitable for above medium and high hardness stone materials, new crusher structure, optimized laminar crushing cavity and intelligent automatic control system and innovative internet control system, large production capacity and low energy consumption, while the design of large eccentric distance and high pendulum frequency can make the equipment run at a lower speed, and can change the grade of the product in order to produce fewer fines, and all the parts of the main machine assembly can be disassembled from the upper or side, which makes the operation All parts of the main machine can be disassembled from the upper part or the side, which makes the operation more convenient, saves manpower and time, and the maintenance cost is lower, and there are single-cylinder, multi-cylinder and full hydraulic series.

3.HGT Gyratory Crusher

Production capacity: 60-3000t/h

HGT gyratory crusher is suitable for medium hardness and brittle materials, especially limestone and medium hardness stone with compressive strength lower than 200Mpa. It relies on the impact of hammer to crush materials, modular design, adjustable movable lining plate and self-flowing trough design, which can change the two-stage crushing to one-stage crushing to realize the conversion of coarse, medium and fine crushing, reduce the process and improve the workload, and the design of self-flowing trough avoids repeated crushing, and the production of powder is small. At the same time, the large-sized machine is equipped with hydraulic hammer shaft extraction device, which is convenient to replace the hammer head and hammer shaft, saving time and labor.

From research and development, manufacturing, sales, after-sales and other aspects, SMPCRUSHER manufacturers are independent, specializing in the production of various types of mining equipment has been many years, rigorous selection of materials, perfect process, not through other dealers, specific large stone crusher prices, online consultation can be obtained with a key, enjoy factory price concessions, there are responsible for the manager of the equipment to serve you, and are in stock, delivery is more timely, time to visit the factory. You can visit our factory to have a look around.