Summer temperatures are high, the temperature of the parts of the equipment in the operation process will continue to rise, so that the equipment is in a "cranky" working condition, the mill in such a high-temperature environment, how to use, the use of the process should pay attention to what, this is a lot of use of the equipment customers are more concerned about a problem. Here are a few points of attention to the use of the mill in the hot summer.

1, cooling

The mill should be placed in a cool and ventilated house as far as possible. If there are several grinders working at the same time, what you need to do is to place these grinders in a place far away from each other, that is, don't put more than one mill together, that will have a great impact on the mill's heat dissipation. You can also install exhaust fan for the house with the mill, try to choose the high power, because if the power is not big enough, the indoor temperature can not come down at all.

2, moisture

In summer, especially in the summer, the weather is humid, and if the moisture invades the machine, it will greatly affect the service life of the mill. In the summer, we must pay attention to check the surface of the mill paint has not peeled off, if the paint is peeling off, revealing the inside of the iron, the mill if it is placed outdoors, once the rain is very easy to cause corrosion of the machine, even if it does not rain, the humidity in the air will also cause the mill to rust. Therefore, if you find that the paint on the top of the mill is incomplete, you must restart the painting for the machine in time.

3, lubrication

To the mill's bearings or other sliding, rolling devices in time to apply lubricant, lubricant can reduce the friction between the devices, thereby reducing the heat generated by friction. Although this heat seems insignificant, but in the high-speed rotation, operation, or will produce a very high temperature. Therefore, if the device can be made to rotate more smoothly, or can reduce a lot of heat generation.

4, clean up

Clean up the mill parts inside and outside, the body, grinding ring, grinding roller, motor, belt, gear joints and so on, all places that can be cleaned up should be cleaned up. The purpose of doing so is to find out if there are any loopholes.

SMPCRUSHER is a high-tech company integrating R&D, production and distribution, and provides crusher, sand making, grinding equipment, mobile crushing station, etc. mature products and solutions used in aggregate, mining and waste recycling. At present, we have established cooperative relations with customers in more than 170 countries, and helped them plan reasonable programme and realize scientific process.