Cone crushers are usually used to treat construction waste. What kind of cavity type is used when using a cone crusher? The following is a detailed introduction:

Click here to consult about mobile cone crusher

Cone crushers have excellent crushing performance, high crushing rate, significant working efficiency, relatively low energy consumption, and can produce products of uniform size. This equipment is particularly suitable for the processing of ores and rocks with medium and fine crushing requirements. Cone crushers are widely used in many industrial fields, including metallurgy, construction, road construction, chemical industry and silicate industry, as the preferred equipment for raw material crushing.

Cone crushers are divided into short-head type and standard type, both of which are suitable for different crushing needs.

Standard cone crushers are mainly used in two-stage or three-stage crushing processes. The finished particle size is generally greater than 25mm and is not suitable for two-stage closed-loop crushing operations. Its crushing ratio is usually between 4 and 6, and it is more suitable for use after screening and crushing to achieve ideal crushing effect.

Short-head cone crushers focus on three-stage crushing and can produce finished products with a particle size of less than 25mm. This model requires closed-loop operation, with a crushing ratio range of 3 to 5, and also requires screening and crushing processes to ensure crushing efficiency and finished product quality.

Typically, the tight side discharge port of the crusher is equal to the size of the screen or slightly larger than the average particle size of the desired product. In the case of product type, the short head type crushing chamber can obtain a relatively good product type, followed by the standard fine chamber type. The larger the chamber type, the less likely it is to obtain a good product type. In order to ensure a good product size, the crushing ratio should be controlled between 3 and 3.5.