Large stone factories have a variety of stone crusher equipment, suitable for crushing hard stones such as granite, pebbles, and bluestone. According to the size of the raw materials, the equipment can be divided into different models; according to the installation method, it can be divided into fixed and mobile types; according to the crushing needs, it can be divided into coarse crusher and fine crusher to meet different production needs.

Click here to consult for knowledge about stone crushing equipment

The jaw crusher can handle large stones of about 1500mm, is good at crushing high-hardness stones, and has a large crushing ratio. It uses dynamic and static jaw plates to squeeze and crush stones. When the dynamic jaw moves downward, the angle becomes smaller. Under the action of the pull rod, the dynamic jaw plate leaves the static jaw plate, so that the crushed material is discharged from the crushing chamber, and finally the crushed stone product is obtained.

The impact crusher can handle stone raw materials of about 800mm, and uses the impact crushing principle for medium and fine crushing operations. When working, the stone enters the plate hammer area and collides with the plate hammer, and then is repeatedly crushed by the impact device until it reaches the required particle shape, and finally discharged from the discharge port to achieve efficient crushing.

Cone crusher is suitable for crushing stone materials of about 600mm. It adopts the principle of lamination crushing and drives the material to make a swing motion through the motor, so that the material is repeatedly impacted and crushed in the cavity. Its multi-cavity design is especially suitable for crushing hard stones, and it has a safety system to reduce wear and tear, ensuring that the stone plant obtains better crushing and discharging effects.