"The key to efficient crushing of construction waste: over-iron protection, excellent cavity type, uniform feeding, appropriate rotation speed and compliant feeding. 5 big strategy helps you to produce 2000 tons per day without worry."

Even if the efficiency of the construction waste crusher is relatively high, in actual production, with the different nature of the material and the length of time the equipment is used, its efficiency will be affected and reduced to some extent, so how to improve the efficiency of the construction waste crusher?

1. Over-iron protection

Under normal production conditions, good over-iron protection can protect the equipment from damage when there are unbreakable materials or overloads, reduce the failure rate, and ensure that the equipment has higher production efficiency.

2. Excellent design of crushing cavity type

The crushing cavity of the construction waste crusher is a very important part. Changing the crushing cavity type can change the force angle of the material in the crushing process. It is also related to the number of times the material is crushed in the crushing cavity. It has a great impact on the efficiency and performance of the crusher. When purchasing, choose the crushing cavity type that meets the needs.

3. Uniform feeding

The feeding speed should be uniform. Too fast may cause material blockage and damage to crushing equipment. Too slow will cause untimely feeding, resulting in gaps and reducing the efficiency of the construction waste crusher. Therefore, the feeding speed should be slow and uniform.

4. Maintain proper speed

The motor is the power source of the construction waste crusher, which also affects the speed of the equipment. The speed with high power of the motor will be higher and the production capacity will be greater. The number of times the material is crushed will increase accordingly, which can make the particle size of the crushed material finer. However, it is not allowed to be too fast, which will damage the equipment. The speed can be appropriately accelerated.

5. The feed material shall meet the equipment requirements

The hardness, humidity and size of the materials entering the construction waste crusher shall meet the requirements of the equipment. The hardness and humidity of the material is relatively large, the crushing strength and difficulty will increase, and the efficiency will decrease. Therefore, the crushed material should meet the requirements of the construction waste crusher in order to improve the production efficiency.