There are many factors affecting the production capacity of ultrafine mill, the user in the process of using only a comprehensive understanding of its performance, in order to ensure the smooth progress of production. The following for the majority of users to summarize the impact of the production capacity of ultra-fine mill factors.

1, material hardness

Influence on the production capacity of ultrafine mill is the direct point of the hardness of the broken material, because the greater the hardness of the material grinding up the more difficult, resulting in its production capacity will also be very low, and the greater the hardness of the material, the wear and tear on the components will be more serious, which will lead to the decline in the production capacity of ultrafine mill. So the hardness of the material can directly affect the production capacity of the ultrafine mill, in the choice of ultrafine mill specifications and material hardness must be careful, ultrafine mill specifications and materials must match.

2, the composition of the material

The higher the content of fines in the material affects the grinding efficiency of the ultrafine mill, because more fines, when it enters the ultrafine mill will be adhered together or adhered to the grinding rollers, affecting the normal grinding work, so for the high content of fines in the material, in the ultrafine mill before entering a sieve, as far as possible, will be screened from the fines in the material, to ensure that the normal work of the ultrafine mill will not be affected. be affected.

3, the particle size of the material after grinding

If the fineness of the material to be achieved after grinding is very high, then relatively speaking, the greater the strength of the ultrafine mill needs to be used to grind the material, the grinding capacity of the ultrafine mill is relatively small, then the production capacity of the ultrafine mill will also decline. Therefore, in general, only the material particle size is set at medium-fine.

4、Viscosity and humidity of materials

The greater the viscosity of the material, the stronger the adhesion between the materials, if not dealt with in time, it will lead to a large number of materials adhering to the grinding rollers, affecting the production capacity of the ultrafine mill. Similarly, the humidity of the material is the same reason, the greater the humidity, the easier it is to cause clogging phenomenon, reduce the production capacity of ultrafine mill.

SMPCRUSHER is a high-tech company integrating R&D, production and distribution, and provides crusher, sand making, grinding equipment, mobile crushing station, etc. mature products and solutions used in aggregate, mining and waste recycling. At present, we have established cooperative relations with customers in more than 170 countries, and helped them plan reasonable programme and realize scientific process.