There are several ways to reduce the noise of mobile crushing stations:

Click here to learn about mobile station knowledge

Solution 1: Although the mobile crushing station is a mobile device and does not need to be installed on the foundation, its components need to be installed on the chassis. Therefore, if an anti-vibration base is installed during installation, the noise can be greatly reduced during production;

Solution 2: Add wear-resistant rubber as a lining plate at the point where the mobile crushing station hits the material to avoid the noise caused by excessive impact. In addition, improving the processing and assembly accuracy of the crushing station can also reduce the noise caused by machine vibration and friction. These two methods are also effective in reducing noise Method;

Scheme 3: Cover the transmission surface of the feed plate and feed hopper of the mobile crushing station and the frame shell with damping materials to reduce the radiation area of the noise. In addition, install a silencer channel at the original discharge port of the equipment to prevent the internal noise from radiating outward. This is also an effective noise treatment solution;

Scheme 4: If the mobile crushing station fails during use, it will also generate noise, so it is necessary to eliminate the equipment failure in time. For example, if the belt deviates, it will cause the sound of the product belt hitting. For example, if there is a problem with the discharge, too much stone hitting the equipment will also generate noise, etc., so timely elimination of these faults can reduce the generation of noise;