Petroleum decompression residue oil, by the coking device, in 500-550 degrees Celsius under the cracking coking and the generation of black solid coke, after crushing/grinding treatment, can be made into graphite, calcium carbide, or as carbon electrode raw materials, etc., the various fields are widely used, the return on investment in the increasing, about the petroleum coke crusher/grinding machine, the production process, the price of other related information, this article has a specific introduction.

First, petroleum coke crushing/grinding machine introduction

Petroleum coke is generally considered to be an amorphous carbon, or a highly aromatic polymer carbide, containing tiny graphite crystals in the needle or granular structure of the charcoal body material, from the appearance of irregular shape, size of the black block, relative density of 0.9-1.1, combined with the characteristics of the material, the general selection of petroleum coke processing equipment, such as jaw crusher, raymond mill.

1、Petroleum Coke Crusher_Jaw Crusher

Handling particle size ≤ 1200mm, finished size 10-350mm.

Adopting the principle of extrusion crushing, the crushing chamber is deep and without dead zone, which improves the feeding capacity and output.

The flywheel design effectively reduces vibration and makes the operation more stable.

Optimise the movement parameters, the crushing ratio is bigger, the discharge opening gasket is adjusted, the finished product has good grain shape and is cubic.

The integrated structure of motor base and host makes the installation easier and saves occupied space.

2、Petroleum Coke Mill_Raymond Mill

Handling particle size ≤ 25mm, finished particle size 0.173-0.044mm.

Its three-dimensional structure, small footprint, complete sets of strong, from the block material to the finished powder independent of a production system.

Intelligent operating system, the workshop can basically achieve unmanned operation, high production efficiency, coupled with the new pulse dust removal equipment to reduce pollution.

Finished fine powder is of good quality, uniform, high sorting precision, higher sieve rate, fineness can be adjusted according to demand.

Second, petroleum coke production process flow chart and video

The production process mainly involves crushing, grinding, drying, calcining and other processes, the specific petroleum coke production process flow, but also need to combine the enterprise production environment, infrastructure settings, investment budgets, etc. Here is a team of technical engineers, tailored to each customer to develop a programme.

Petroleum coke production process: petroleum coke → vibrating feeder → jaw crusher → dryer → Raymond mill → rotary kiln → qualified finished product into storage;

Closed-circuit grinding process: first grinding and then grading, the back of the mill in series with a classifier, grinding processed powder through the classifier for coarse and fine grading, fineness of fine particles to meet the requirements of the material sent to the finished product library, does not meet the requirements of the fineness of coarse particles sent back to the mill to be processed again.

Open-circuit grinding process: first classify and then grind, the raw material is firstly classified by classifier for coarse and fine grading, the fine ash which meets the requirement of fineness need not be ground and directly enter into the finished product storehouse, and the one which doesn't meet the requirement of fineness is sent into the mill for grinding until it reaches the expected fineness.

SMPCRUSHER is a high-tech company integrating R&D, production and distribution, and provides crusher, sand making, grinding equipment, mobile crushing station, etc. mature products and solutions used in aggregate, mining and waste recycling. At present, we have established cooperative relations with customers in more than 170 countries, and helped them plan reasonable programme and realize scientific process.