Sand making machine is one of the commonly used equipment in machine-made sand production equipment. It needs regular maintenance after running for a period of time. The following daily maintenance requirements:

Click to consult for knowledge about sand making machine

1. When feeding the sand making machine, the first thing to do is to feed continuously and evenly. Only uniform feeding can ensure the consistency of output particle size. When feeding, it is also necessary to check whether the material has large pieces, impurities, and whether there are debris such as iron filings. If there are debris, the sand making machine will be damaged. Each model of sand making machine has a limited feed particle size. If the feed size is too large, it is easy to cause blockage and make the equipment lose its crushing ability. Too much fine powder in the material will also affect sand making. Therefore, fine powder or too large materials should be screened out to avoid affecting the normal operation of the sand making equipment.

2. The sand making machine should pay attention to daily maintenance. The sand making machine needs to be shut down regularly and the internal wear of the sand making machine should be observed regularly. If there is wear, it should be replaced or repaired in time. In addition, it should be noted that in the normal operation of the sand making machine, it is very unlikely to open the observation hole in order to avoid dangerous accidents.

3. The tension of the transmission V-belt should be adjusted appropriately to ensure the grouping and matching of the V-belts, so that the length of each group is as consistent as possible.

4. During the working process, since the sand making machine is a high-speed running equipment, special attention should be paid to safety. Workers should stay away from the equipment. If maintenance is required on the machine, the power supply must be turned off before operation.