The price of sand making equipment ranges from hundreds of thousands to millions, which depends on the size, characteristics and production capacity of the raw material: only a single sand making machine is needed for materials below 5 cm, and crushing equipment is needed for materials above 30 cm; different hardness and humidity raw materials correspond to different machine models, and the configuration scheme of tens of tons to thousands of tons per hour directly affects the final quotation.

A set of sand making equipment ranges from hundreds of thousands to millions, and the following factors mainly affect the price of the equipment:

First, the key to deciding whether to use a single sand making machine or multiple equipment lies in the size of the raw material. If the size of the raw material is less than 5 cm, only a single sand making machine is needed, and then supporting equipment such as feeders, vibrating screens, and sand washers are configured as needed. If the size of the raw material is too large, crushing equipment is required. If the size is less than 30-40 cm, add a medium crushing equipment (such as impact or cone crusher); if the size is larger, coarse crushing is required before medium crushing, generally using a jaw crusher.

Secondly, in addition to the size of the raw stone, the characteristics of the stone are another key factor. There are a wide variety of raw materials for sand making, including ordinary mountain stones (such as pebbles, limestone, granite, basalt), as well as coal gangue, construction waste, etc. The characteristics of different raw materials vary significantly, such as hardness, humidity, etc., which leads to differences in the equipment suitable for them in the sand making process, and they need to be selected according to demand.

After that, it is the production capacity and the demand for output. When investing in the sand making project in the early stage, if the funds are limited, small-scale production is often selected, with an output of tens to hundreds of tons per hour, and the production line configuration is relatively simple. If the budget is sufficient and large-scale production is pursued, the output can reach hundreds or even thousands of tons per hour, and the production line configuration plan needs to be greatly adjusted. At the same time, the requirements for the particle size of the finished product are different, such as only machine-made sand or mixed materials (including various specifications of gravel and machine-made sand), which will also directly affect the equipment configuration, and the price difference between different equipment is also large.